Menu
Notices / Tender (Inviting Offers)

There is no current tender notice posted !!
Tender No IC000139 for Supply & Installation of Rotary Evaporator, Diaphragm Pump & Recirculating Chiller - Chem
Tender No IC000139 for Supply Installation of Rotary Evaporator Diaphragm Pump Recirculating Chiller - Chem...View Details →

BIT Mesra July 12, 2024   July 26, 2024

Tender No IC000173 for Supply & Installation of Lightning Arrester - Space Engg.
Tender No IC000173 for Supply Installation of Lightning Arrester - Space Engg....View Details →

BIT Mesra July 12, 2024   July 26, 2024

Tender for Providing and Applying Interior, Exterior wall and Enamel painting work at BIT Deoghar Campus
The last date for submission of bids is 25.07.2024 before 300 pm ...View Details →

BIT Mesra July 10, 2024   July 25, 2024

Tender for Supply of Furniture items for the Department of Chemical Engineering (Pharamcy Building) at BIT Mesra
The last date for submission of bids is 24.07.2024 before 300 pm ...View Details →

BIT Mesra July 12, 2024   July 24, 2024

Tender for Rate Contract for the Supply of Chemicals to be used in Water Treatment Plant at BIT Mesra
The last date for submission of bids is 23.07.2024 before 100 pm ...View Details →

BIT Mesra July 09, 2024   July 23, 2024

Short Tender for Supply of Steel Cot, Steel Table and Chairs at BIT Mesra
The last date for submission of bids is 16.07.2024 before 300 pm...View Details →

BIT Mesra July 10, 2024   July 16, 2024

SHORT TENDER NO.33 SUPPLY AND INSTALLATION OF WORKSTATION IN MECHANICAL ENGG.
SHORT TENDER NO.33 SUPPLY AND INSTALLATION OF WORKSTATION IN MECHANICAL ENGG....View Details →

BIT Mesra July 04, 2024   July 12, 2024

LTE for Indent-34(Digital Multimeter with Oscilloscope) for Electrical and Electronics Engg.
Procurement of Digital Multimeter with Oscilloscope for Electrical and Electronics Engg....View Details →

Electrical and Electronics Engg, BIT Mesra July 05, 2024   July 11, 2024

LTE for Indent-93(Digital Multimeter-Fluke make)for Electrical and Electronics Engg.
Procurement of Digital Multimeter-Fluke makes for the Electrical and Electronics Engg....View Details →

Electrical and Electronics Engg, BIT Mesra July 05, 2024   July 11, 2024

LTE for Indent-45( Ball Valve) for Space Engineering and Rocketry
Procurement of Ball Valve for Space Engineering and Rocketry...View Details →

Space Engineering and Rocketry, BIT Mesra July 05, 2024   July 11, 2024

LTE for Indent-35 (Single phase hall effect voltage & current sensors etc) for Electrical and Electronics Engg.
Procurement of Single phase hall effect voltage current sensors etc for Electrical and Electronics Engg....View Details →

Electrical and Electronics Engg, BIT Mesra July 02, 2024   July 09, 2024

Tender for Renovation and Modification work in the Guest House at BIT Patna Campus
The last date for submission of bids is 08.07.2024 before 3 pm...View Details →

BIT Mesra June 28, 2024   July 08, 2024


BILL OF QUANTITY  
Sl. No. Item Description Unit Quantity  Rate Amount
Internal Work        
1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 1 KM lead as per direction of Engineer In-charge- in Cement Mortor  Cum 9.41    
2 Taking down old door /Window with frame  including stacking serviceable materials in countable stacks within 1 KM lead and disposal of unserviceable materials with all lead etc.complete as per direction of E/I. Nos 4.00    
3 Dismantling steel work in single sections  Kg 504.00    
4 Dismantling/ Removing plaster work from wall  including stacking material within 50 metres lead. Sqm 20.00    
5 Dismantling tiles including stacking serviceable materials within 1 KM lead and disposal of unserviceable materials with all lead etc.complete as per direction of E/I. Sqm 13.20    
5 Providing flat brick soling sqm. 8.40    
6 Providing and laying in position cement concrete of specified grade including the cost of centering and shutteing - All work upto plinth level in 1:3:6 (1 Cement : 3 sand : 6 stone aggregate 20 mm nominal ) cum. 0.65    
7 Brickwork with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and size in: Cement mortar 1:6 ( 1 Cement: 6 Coarse sand) Cum 3.20    
8 Providing half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and size in: Cement mortar 1:4 ( 1 Cement: 6 Coarse sand) sqm. 41.80    
9 Providing and fixing steel window with grill with standard section including fixing 4 mm glass as per existing design, priming coat complete Kg 168.00    
10 Cement Plaster- 12 mm cement plaster of mix 1:6 sqm. 93.60    
11 Providing and applying Plaster of paris putty of 12 mm thick over plastered surface to prepare the surface even and smooth complete sqm. 93.60    
12 Providing and applying 1st quality acrylic emulsion (ready mixed) having VOC content less than 50 gm/litre, of approved shade and Asian make premium emulsion, complete as per manufacturers specifications: Two or more coat over a coat of water thinable cement primer including repairing the wall if any with putty etc. complete sqm. 860.00    
13 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm. 170.00    
14 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size 600 x 600 mm sqm. 80.00    
15 Providing and laying Ceramic glazed floor tiles of size 300x300 mm and wall tiles 300x200 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. sqm. 25.00    
16 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws   sqm. 8.00    
17 Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: TMT bars of grade Fe- 500D Kg 35.00    
18 Reinforced concrete work in beams, suspended floors, roofs, shelves, chajjas, lintels etc. above plinth level including cost of centering, shuttering, finishing but excluding the cost of reinforcement and renforcemnt with 1:1.5:3 in all floors (1 Cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal ) cum. 0.20    
19 Supply and fixing of PHE Work        
20 Providing and fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern including painting of fittings, cutting and makig good the walls: white vitreous china wash basin size 630x450 mm with a single 15 mm CP brass pillar tap Each 1.00    
21 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings Each 1.00    
22 Providing and fixing kitchen sink with CI brackets, C.P. brass chain with rubber plug , 40 mm CP brass waste complete, including painting the fittings and brackets, cutting and making good the walls etc. whereever required: White glazed fire clay kitchen sink of size 600x450x250 mm  Each 1.00    
23 Prociding and fixing Exhaust fan of 300 mm size including making the hole in the wall and making good etc. complete Nos. 1.00    
24 Providing and fabricating cupboard shutter below kitchen slab of 18 mm thick Century/ greenply make (including L bihari hinges, handle, magnetic catcher etc. complete in all respect)  Sqm 6.00    
25 Providing and fabricating Wardrobe of size 1600 mm x 2100 mm with requisite partitions and hanger rod of Aluminium etc.of 18 mm thick Century/ greenply make WPC board as per approved drawing and cabinet etc. in kitchen (including L bihari hinges, handle, magnetic catcher etc. complete in all respect) (Measurement will be done as area of the front rectangle only) Sqm 21.00    
26 Providing and fabricating door shutter below and one row Cabinet over cooking slab with 12 mm century make ply board including making frame with 18 mm Ply board, all fittings, primer, paint etc. complete in all respect Sqm 8.00    
27 Fixing choukhats in existing opening including embedding choukhats in floors or walls cutting masonary for holdfasts, embedding hold fast in cement concrete blockand making the good the damage floors and walls including disposle of rubbish etc. complete  Each 3.00    
28 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm  Sqm 80.00    
29 Cutting and Polishing of old Terrazo tiles flooring two coats with applying pigments, if necessary complete in all respect Sqm 170.00    
TOTAL (A)  
B Balcony work        
30 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (not exceeding 1.5 m in widh or 10 sqm on plan) including back filling in foundation and  getting out and disposal of surplus excavated earth lead upto 1 KM and lift upto 1.5 m, as directed by Engineer-incharge. Cum 6.00    
31 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete Cum 0.97    
32 Flat brick sololing in foundation plinth Sqm 9.67    
33 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteing - All work upto plinth level in 1:3:6 (1 Cement : 3 sand : 6 stone aggregate 20 mm nominal ) Cum 0.97    
34 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement all work upto plinth level in 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal )  Cum 2.50    
35 Reinforced concrete work in columns above plinth level including cost of centering, shuttering, finishing but excluding the cost of reinforcement and renforcemnt in 1:1.5:3 in all floors (1 Cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal )  Cum 1.55    
36 Reinforced concrete work in beams, suspended floors, roofs, shelves, chajjas, lintels etc. above plinth level including cost of centering, shuttering, finishing but excluding the cost of reinforcement and renforcemnt with 1:1.5:3 in all floors (1 Cement : 1.5 coarse sand : 3stone aggregate 20 mm nominal ) Cum 0.94    
37 Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: TMT bars of grade Fe- 500D Cum 199.65    
38 Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level: TMT bars of grade Fe- 500D Kg 329.05    
39 Brickwork with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and size in: Cement mortar 1:6 ( 1 Cement: 6 Coarse sand) Cum 0.61    
40 Providing half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level in all shapes and size in: Cement mortar 1:4 ( 1 Cement: 6 Coarse sand) Sqm 3.65    
41 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bar, ladder, railing, brackets, gates and similar works including hand rail of approved shape and size Kg 455.40    
42 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment  to match the shade of the slab including rubbingand polishing complete with base of cement mortar 1: 4 : 25 mm thick Sqm 24.30    
43 Providing and fixing on wall face unplasticized PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gaps for thermal  expansion, (i) single socketed pipes : 110 mm diameter including all fitting/ accessories, shoe, bend, clamp etc. complete  Meter 3.90    
44 Cement Plaster- 12 mm cement plaster of mix 1:6 Sqm 45.45    
45 Providing and applying Plaster of paris putty of 12 mm thick over plastered surface to prepare the surface even and smooth complete Sqm 23.27    
46 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved shade and colour complete as per manufacturers specifications: Two or more coat over a coat of water thinable cement primer Sqm 23.27    
47 Finishing walls with Acrylic smooth exterior paint of required shade: New work ( Two or more coat applied @1.67 ltr/ 10 Sqm over and including primimg coat  of exterior primer applied @2.20 kg/ 10 Sqm) Sqm 26.10    
48 Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Sqm 22.77    
49 Fixing choukhats in existing opening including embedding choukhats in floors or walls cutting masonary for holdfasts, embedding hold fast in cement concrete blockand making the good the damage floors and walls including disposle of rubbish etc. complete  Each 0.50    
50 Making the opening in brick masonary including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including  disposal of rubbish all complete for door/ window  Sqm 1.05    
51 Supply & installation of S S railing Glazing system with railing and  fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly etc. complete. Sqm 6.75    
TOTAL (B)  
        TOTAL (A+B)  
Add GST @18%  
BOCW @ 1%  
GRAND TOTAL  
LTE for Indent-19(Foam Generation Machine) for the Architecture and Planning Department.
Procurement of Foam Generation Machine for the Architecture and Planning Department....View Details →

Architecture and Planning, BIT Mesra June 21, 2024   June 28, 2024

LTE for Indent-22(Vibration table & Chemical Hardner) for the Architecture and Planning Department.
Procurement of Vibration table Chemical Hardner for the Architecture and Planning Department....View Details →

Architecture and Planning, BIT Mesra June 21, 2024   June 28, 2024

Tender no.77 Supply and Installation of Networking Items for Hostel No. 5,6 &7
Tender no.77 Supply and Installation of Networking Items for Hostel No. 56 7...View Details →

BIT Mesra June 13, 2024   June 27, 2024

Expression of Interest from Consultancy Firms for Providing Consultancy Work for Constructiuon of various works at BIT Jaipur Campus
The last date for submission of bids is 27.06.2024...View Details →

BIT Mesra June 20, 2024   June 27, 2024

Request for quotation for Campus Boundary Wall Fencing work at BIT Mesra
The last date for submission of quotations has been extended upto 21.06.2024...View Details →

BIT Mesra June 14, 2024   June 21, 2024


BILL F QUANTITY
Barbed Wire Fencing
1 Earthwork in exacavation in foundationTrenches in soil and disposal of excavated earth as obtained to a distance upto 100 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.                                                                                                                                                                                                                                                  Cum 16.00    
2 Providing P.C.C. M-10 with nominal mix of (1:3:6) in  Foundation with approved quality of stone chips 20 mm to 6 mm size graded  and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixture, placing in position, vibration, striking, curing, taxes and royalty all complete as per building specification & direction of E/I. Cum 14.00    
3 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire, between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. Payment to be made per metre cost of total length of barbed wire used. (posts and barbed wire will be provided by the department)  M 7700.00    
      TOTAL   
  Add GST @ 18%   
  Add BOCW @ 1%  
      GRAND TOTAL  
Tender No IC000055 for Supply & Installation of THERMAL IMAGING CAMERA - EEE
Tender No IC000055 for Supply Installation of THERMAL IMAGING CAMERA - EEE...View Details →

BIT Mesra June 12, 2024   June 20, 2024

Tender No IC000027 for Supply & Installation of Differential Voltage Probe - EEE
Tender No IC000027 for Supply Installation of Differential Voltage Probe - EEE...View Details →

BIT Mesra June 10, 2024   June 18, 2024

LTE for Indent-45 (Ball Valve) for Space Engg. & Rocketry Department.
Procurement of Ball Valve for Space Engg. Rocketry Department....View Details →

Space Engineering and Rocketry, BIT Mesra June 10, 2024   June 18, 2024